Hikvision NVR IP163

Introduction

Hikvision, a leading provider of security surveillance solutions, offers a wide range of network video recorders (NVRs) to cater to various surveillance needs. These NVRs play a crucial role in managing and storing video footage captured by IP cameras. The IP address of a Hikvision NVR is a unique identifier that allows users to access the device remotely over a network.

How to Find the Hikvision NVR IP Address

There are several methods to find the IP address of a Hikvision NVR:
Local Discovery: Connect the NVR to a computer using a network cable. Open the Hikvision iVMS-4200 software and navigate to the "Device Management" tab. The IP address will be displayed in the list of discovered devices.
Web Interface: Access the NVR's web interface by typing its default IP address (usually 192.168.1.64 or 192.168.1.108) into a web browser. The IP address will be displayed in the upper-right corner of the login page.
Physical Label: Check the physical label attached to the NVR. The IP address may be printed on the label along with other device information.
DHCP Server: If the NVR is connected to a DHCP server, the IP address can be obtained from the server's lease table. Use a DHCP management tool or contact the network administrator to locate the device.

Changing the Hikvision NVR IP Address

Users may need to change the IP address of their Hikvision NVR for various reasons, such as assigning a static IP address or integrating it into a specific network configuration. Here's how to change the IP address:
Web Interface: Access the NVR's web interface and navigate to "Network" > "TCP/IP" settings. Enter the new IP address, subnet mask, and default gateway. Click "Save" to apply the changes.
Hik-Connect App: Connect to the NVR using the Hik-Connect mobile app. Go to "Device Settings" > "Network" > "IP Configuration" and enter the new IP address and other relevant network information.

Troubleshooting IP Address Issues

If you encounter issues accessing the Hikvision NVR due to IP address problems, try the following troubleshooting steps:
Verify Network Connectivity: Ensure that the NVR is connected to the network and can communicate with other devices.
Check Default Gateway: Make sure that the default gateway entered in the NVR's network settings is correct and allows traffic to/from the device.
IP Address Conflict: Verify that the new IP address assigned to the NVR does not conflict with any other devices on the network.
Contact Technical Support: If you continue to experience issues, contact Hikvision technical support for assistance.

Conclusion

The Hikvision NVR IP address is an essential piece of information for remotely accessing and managing the device. By following the methods outlined above, users can easily find and change the IP address as needed. Proper network configuration and troubleshooting can ensure reliable connectivity and optimal performance of the Hikvision NVR.

2024-12-09

Previous：Hikvision Surveillance Encryption Tips

Next：A Comprehensive Guide to Angular Steel Surveillance Towers