How to Reset Hikvision Network Surveillance Cameras164

Hikvision is a leading manufacturer of surveillance cameras and other security equipment. Their cameras are used in a wide range of applications, from home security to commercial surveillance. If you need to reset your Hikvision network camera, there are a few different ways to do it.

Resetting via the Web Interface

The easiest way to reset your Hikvision camera is via the web interface. To do this, open a web browser and enter the IP address of your camera. You will then be prompted to enter your username and password. Once you are logged in, click on the "System" tab and then click on the "Reset" button.

You will be prompted to confirm that you want to reset the camera. Click on the "OK" button to proceed. The camera will then restart and the default settings will be restored.

Resetting via the Physical Reset Button

If you cannot access the web interface, you can also reset your Hikvision camera via the physical reset button. This button is typically located on the back or bottom of the camera. To reset the camera, press and hold the reset button for about 10 seconds. The camera will then restart and the default settings will be restored.

Resetting via the SADP Tool

The SADP Tool is a software application that can be used to discover and manage Hikvision cameras on a network. You can use the SADP Tool to reset your camera if you cannot access the web interface or the physical reset button. To do this, open the SADP Tool and click on the "Reset" button. Select your camera from the list and click on the "OK" button. The camera will then restart and the default settings will be restored.

What to Do After Resetting Your Camera

After resetting your Hikvision camera, you will need to reconfigure it. This includes setting the IP address, username, and password. You will also need to configure any other settings that you had previously customized.

If you are having trouble resetting your Hikvision camera, you can contact Hikvision technical support for assistance.

Tips for Resetting Your Hikvision Camera* Make sure that you have the correct IP address, username, and password for your camera.
* If you are resetting the camera via the physical reset button, make sure that you press and hold the button for at least 10 seconds.
* If you are resetting the camera via the SADP Tool, make sure that you select the correct camera from the list.
* After resetting the camera, you will need to reconfigure it. Make sure that you save your changes before exiting the configuration menu.

Conclusion

Resetting your Hikvision network camera is a relatively simple process. By following the steps outlined in this article, you can easily reset your camera and restore the default settings. If you have any trouble resetting your camera, you can contact Hikvision technical support for assistance.

2024-12-09

Previous：Enterprise Hard Drive Recommendations for Monitoring Systems

Next：The Ultimate Guide to Finding the Best Monitoring Equipment Retailer