How to Modify the IP Address of a Hikvision Surveillance Camera359

Hikvision surveillance cameras are among the most popular and reliable security cameras on the market. They offer a wide range of features and are relatively easy to install and use. However, one of the most common challenges that users face is changing the IP address of the camera. This can be necessary for a variety of reasons, such as changing the network configuration or moving the camera to a new location.

Fortunately, changing the IP address of a Hikvision surveillance camera is a relatively simple process. In this article, we will provide step-by-step instructions on how to do it using the web interface or the SADP tool.

Using the Web Interface

To change the IP address of a Hikvision surveillance camera using the web interface, follow these steps:1. Open a web browser and enter the IP address of the camera into the address bar.
2. Enter the username and password for the camera. The default username is "admin" and the default password is "12345".
3. Click on the "Configuration" tab.
4. Click on the "Network" sub-tab.
5. Under the "TCP/IP" section, change the IP address, subnet mask, and gateway as needed.
6. Click on the "Apply" button.
7. The camera will reboot and the new IP address will be applied.

Using the SADP Tool

If you do not know the IP address of the camera or if you cannot access the web interface, you can use the SADP tool to change the IP address. The SADP tool is a software application that can be used to discover and manage Hikvision surveillance cameras on a network.

To change the IP address of a Hikvision surveillance camera using the SADP tool, follow these steps:1. Download and install the SADP tool from the Hikvision website.
2. Open the SADP tool and click on the "Search" button.
3. The SADP tool will search for all Hikvision surveillance cameras on the network.
4. Once the camera has been found, select it and click on the "Modify IP Address" button.
5. Enter the new IP address, subnet mask, and gateway as needed.
6. Click on the "OK" button.
7. The camera will reboot and the new IP address will be applied.

Tips

Here are a few tips for changing the IP address of a Hikvision surveillance camera:* Make sure that the new IP address is not already in use by another device on the network.
* If you are changing the IP address of a camera that is connected to a PoE switch, you may need to power cycle the switch after changing the IP address.
* If you are having trouble changing the IP address of the camera, you can contact Hikvision technical support for assistance.

2024-11-23

Previous：Hikvision Surveillance Network Configuration

Next：Dalian‘s Recommended Security Cameras for Smartphones