How to Turn Off the Indicator Light on a Hikvision Camera157

Hikvision cameras are known for their reliability and advanced features. However, some users may find the indicator light on the camera to be distracting or unnecessary. Fortunately, it is possible to turn off the indicator light on a Hikvision camera. Here are the steps on how to do it:

1. Log in to the camera's web interface

To access the camera's web interface, you will need to know the camera's IP address. Once you have the IP address, open a web browser and enter the IP address into the address bar. You will then be prompted to enter a username and password. The default username and password for Hikvision cameras is "admin" and "12345".

2. Navigate to the "Configuration" menu

Once you are logged in to the camera's web interface, click on the "Configuration" tab. This will open a menu with a list of configuration options.

3. Click on the "System" submenu

The "System" submenu contains a list of settings related to the camera's system configuration. Click on the "System" submenu to open it.

4. Find the "Indicator Light" setting

Scroll down the "System" submenu until you find the "Indicator Light" setting. The "Indicator Light" setting is typically located near the bottom of the submenu.

5. Disable the indicator light

Click on the "Disable" button next to the "Indicator Light" setting. This will disable the indicator light on the camera.

6. Click on the "Save" button

Click on the "Save" button to save your changes. The indicator light on the camera will now be disabled.

Additional notes

It is important to note that disabling the indicator light on the camera may make it more difficult to locate the camera in low-light conditions. If you are concerned about being able to locate the camera in low-light conditions, you may want to consider leaving the indicator light enabled.

You can also use the Hikvision iVMS-4200 software to turn off the indicator light on a Hikvision camera. To do this, open the iVMS-4200 software and connect to the camera. Once you are connected to the camera, click on the "Configuration" tab and then click on the "System" submenu. Find the "Indicator Light" setting and click on the "Disable" button. Click on the "Save" button to save your changes.

2024-11-23

Previous：Mercedes-Benz Remote Monitoring: Enhance Your Fleet Management

Next：Hikvision Surveillance: Remote Monitoring for Enhanced Security