How to Change the Device Name of Hikvision Cameras161

Hikvision cameras are widely used in various surveillance systems. If you need to change the device name of your Hikvision camera, you can follow the steps below.

Prerequisites:* Hikvision camera with web access enabled
* Computer or mobile device with a web browser

Step-by-Step Guide:1. Log in to the camera's web interface:
- Enter the IP address of the camera into the address bar of your web browser.
- Enter the username and password for the camera (default: admin/12345).
2. Navigate to "Configuration" > "Network" > "TCP/IP":
- In the left-hand menu, click on "Configuration."
- Then, select "Network" and then "TCP/IP."
3. Modify the "Device Name":
- Find the "Device Name" field.
- Enter the new name for your camera.
- Ensure that the name is unique within your network.
4. Click "Apply":
- Once you have entered the new name, click on the "Apply" button at the bottom of the page.
5. Reboot the camera:
- To apply the changes, you need to reboot the camera.
- In the left-hand menu, click on "Maintenance" > "Reboot."
- Then, click on the "Reboot" button.

Important Notes:* After rebooting, the camera will have the new device name.
* If you cannot access the camera's web interface, you may need to reset the camera to factory settings.
* If you are having trouble changing the device name, you can contact Hikvision technical support for assistance.

Additional Tips:* Choose a meaningful name that helps you easily identify the camera, especially if you have multiple cameras in a system.
* Keep the device name concise and avoid using special characters or spaces.
* It is recommended to use a different device name for each camera to ensure easy identification.

2024-11-21

Previous：Surveillance System Recommendations for Enhanced Security and Monitoring

Next：On-Site Security Camera Installation: A Guide for Enhanced Property Protection