How to Change the IP Address of Your Hikvision IP Camera228

Hikvision IP cameras are ubiquitous in the surveillance industry, known for their reliability and feature-rich capabilities. However, sometimes you need to change the IP address of your Hikvision camera. This might be necessary for several reasons, including resolving IP address conflicts on your network, integrating the camera into a specific IP subnet, or simply for better network organization. This guide will walk you through the process of modifying the IP address of your Hikvision IP camera, covering various methods and troubleshooting common issues.

Method 1: Using the Web Interface (Most Common Method)

The most common and straightforward method to change your Hikvision IP camera's IP address is through its web interface. This requires you to access the camera's web configuration page. Here's a step-by-step guide:
Find the Default IP Address: The default IP address is usually printed on a sticker on the camera itself or found in the camera's quick start guide. Common defaults include 192.168.1.108 or 192.168.0.108, but this can vary. If you can't locate this information, consult your camera's manual.
Connect to Your Network: Ensure your computer is connected to the same network as your Hikvision camera. This is usually done via a wired connection (Ethernet cable) for the most stable connection, but wireless is also possible depending on the camera's capabilities.
Open a Web Browser: Open a web browser (like Chrome, Firefox, or Edge) on your computer.
Enter the IP Address: In the address bar of your browser, type the default IP address of your camera. Press Enter.
Login: You'll be prompted for a username and password. The default credentials are usually "admin" for both username and password. If these have been changed, you'll need to use your custom credentials. If you've forgotten your password, you might need to reset the camera to factory settings (see Method 3).
Navigate to Network Settings: Once logged in, navigate to the Network settings section. The exact location of this section varies slightly depending on the camera model and firmware version, but it's usually under a menu labelled "Network," "System," or "Configuration."
Change the IP Address: Locate the field for the IP address, subnet mask, and gateway. Enter your desired IP address, subnet mask (usually 255.255.255.0), and gateway (usually your router's IP address). Ensure the new IP address is within the same subnet as your network. Double-check the entered values before saving.
Save and Reboot: Save the changes. The camera will likely require a reboot to apply the new IP address. After the reboot, access your camera using the new IP address you have set.

Method 2: Using Hikvision's SADP Tool (For Multiple Cameras or Network Discovery)

Hikvision's SADP (Smart Auto Device Platform) tool is a utility that helps discover and manage multiple Hikvision devices on your network. It can also be used to change IP addresses.
Download SADP: Download the SADP tool from Hikvision's official website. Ensure you download the version compatible with your operating system.
Install and Run SADP: Install the software and run it. SADP will automatically scan your network for Hikvision devices.
Select Your Camera: Select your camera from the list of discovered devices.
Modify IP Address: SADP provides an interface to modify the IP address, subnet mask, and gateway of the selected camera. Enter your desired values and save the changes.
Reboot: The camera will need a reboot to apply the new settings.

Method 3: Factory Reset (Last Resort)

If you've forgotten your login credentials or are encountering other issues, a factory reset might be necessary. This will restore the camera to its default settings, including the default IP address. Caution: This will erase all custom configurations, so only use this as a last resort. The method for performing a factory reset varies by camera model, usually involving a tiny reset button on the camera's casing. Refer to your camera's manual for the exact procedure.

Troubleshooting

If you're having trouble accessing your camera after changing the IP address, try the following:
Verify Network Connectivity: Ensure your computer and camera are on the same network and have a working connection.
Double-Check IP Address: Carefully verify that you've entered the correct IP address, subnet mask, and gateway.
Check Router Settings: Make sure your router's DHCP server is configured correctly and that the IP address you've chosen isn't already in use.
Firewall Issues: Check your computer's firewall and router firewall to ensure they are not blocking access to the camera's new IP address.
Reboot Devices: Reboot your computer, router, and the Hikvision camera.

By following these steps and troubleshooting tips, you should be able to successfully change the IP address of your Hikvision IP camera. Remember to always consult your camera's manual for specific instructions related to your model.

2025-08-25

Previous：Industrial Ultra HD Surveillance: A Comprehensive Guide to Choosing the Right System

Next：Best PoE Security Camera Cables: A Comprehensive Guide to Choosing the Right Cable for Your Surveillance System